SPD EEPROM: Functioning Algorithm
With the advent of the new SDRAM standard, a new I2C interface has also appeared. The interface was developed by Philips and is used as an internal auxiliary bus of…

Continue reading →

The thickness of the magnetic layer of the disk
Removable magnetic media, manufactured by Iomega for Bernoulli drives, were extremely durable and reliable and cost quite a bit. The special 3-inch disks used in Zip are very similar to…

Continue reading →

Are "stamped" discs really so perfect?
"Stamped" discs (or, if you want, "aluminum") can be made in various ways. The most common is, to be precise, injection molding, rather than stamping. Modern technologies make it possible…

Continue reading →

services

Internet integration

Now business is inconceivable without close integration with the Internet. As a rule, several employees of the office need Internet access, and there is only one communication line with the provider. To increase the efficiency of office employees, a proxy server must be installed on the same LAN server. Modern versions of proxy-servers have quite powerful means of protecting the local network, which in itself is important. Continue reading

Almost everything about SPD-EEPROM ...
To this day, there are still SDRAM DIMMs operating at 66 MHz frequencies that are not equipped with the SPD-EEPROM chip, which contains the most important time parameters and data…

...

Zip Technologies: Pros and Cons
Since the creation of the FDD 3.5 "1.44 MB high-density, a lot of time has passed and this type of media has not undergone any changes during this period, while…

...

The thickness of the magnetic layer of the disk
Removable magnetic media, manufactured by Iomega for Bernoulli drives, were extremely durable and reliable and cost quite a bit. The special 3-inch disks used in Zip are very similar to…

...

Processor performance
You can still praise the advantages of technical solutions of the processor. Moreover, the “stone” turned out to be really successful. But many are probably most interested in the end…

...